• アクセスマップ
  • サイトマップ
  • お問い合わせ
  • English

Detail Specification for Optical Board Connector type SF using glass Fibers

  • JPCA-PE03-01-01S(2005)
  • Date of issue: April 2005
  • A4 Size 14 Pages


shop_form_off



Contents
1. Scope This standard specifies the detailed specification for optial board connector type SF
using glass fiber by means of physical contact technique to connect flexible optical board and
ribbon fibers.
The purpose of this standard is to provide the information of required characteristics of the
connector and the methods to evaluate them, and to clarify the conditions to assemble the
connector to optical board.
2. Normative references
3. Terms and Definitions
4. Classification
4.1 Components of SF connector
4.2 Optical fibers
5. Requirements
5.1 Structure and dimension
5.1.1 Plug A
5.1.2 Plug B
5.1.3 Positions of fibers
5.1.4 Adaptor
5.1.5 Positions of microholes
5.2 Interface requirement to the flexible optical board of quartz type optical fiber
5.3 Environmental conditions
5.4 Performance
5.4.1 Appearance
5.4.2 Initial optical characteristics
5.4.2.1 Insertion loss
5.4.2.2 Reflection loss
5.4.3 Mechanical characteritics
5.4.3.1 Vibration
5.4.3.2 Shock
5.4.3.3 Repeated handling
5.4.3.4 Pressing force of clamp spring
5.4.4 Environmental tests
5.4.4.1 High temperature
5.4.4.2 High humidity
5.4.4.3 Temperature cycle
5.5 Indication
6. Test methods
6.1 Pressing force of the clamp spring


注文番号 タイトル 販売価格(税別)
在庫状態 数量 単位  
s023e-k 会員価格 ¥1,000
在庫有り
s023e 頒布価格 ¥2,000
在庫有り
ページトップへ戻る
JPCAへのお問い合わせ